Products
CT135E3/S3

CT135E3/S3

Basic information:
Engine: 6BTAA5.9-G2
Alternator: UCI274E
Controller: DSE6020
Dimension and Weight:
Silent：3200×1133×1766(2168kg)
Open: 2360×847×1366(1381kg)


0.00
0.00
  

Basic information:
Engine: 6BTAA5.9-G2
Alternator: UCI274E
Controller: DSE6020
Dimension and Weight:
Silent：3200×1133×1766(2168kg)
Open: 2360×847×1366(1381kg)


Engine Specifications Alternator Specification
Model 6BTAA5.9-G2 Model UCI274E
Manufacturer CUMMINS Frequency and Speed 50Hz/1500rpm
Number of cylinders 6 Manufacturer STAMFORD
Cylinder arrangement In-line       Prime capacity(kVA) 140
Cycle Four stroke Exciter type Brushless
Induction system Turbocharged Insulation Class H
Compression ratio 16.8:1 Protection IP23
Bore x Stroke 102x120 mm Rated power factor 0.8
Displacement L 5.9 Stator winding Double layer concentric
Estimated total weight (dry) kg 411 Winding pitch two thirds
Rated power KW/HP 120/161 Winding leads 12
Lubrication oil capacity L 14.2 Maximum over speed 2250Rev/min
Coolant capacity L 34 THF (Wave Form IEC) ＜2%
Governer method Electronic TIF (Wave Form NEMA) ＜50
Starting system Electric Voltage regulation 1.00%
Exhaust System Lubrication system
Silence Type Industrial Total System Capacity 16.4litre
Exhaust gas flow (max) 324 litre Normal oil pressure 207-345kPa
Exhaust gas temperature (max) 495℃ Normal oil temperature ≤121℃
Engine Electrical System Fuel system
Battery charging alternator Type of injection model PB pump
Ground (negative/positive) Negative 110% Fuel Consumption (prime) L/H 35
Starter motor rated voltage (DC) 24 V 100% Fuel Consumption (prime) L/H 31
Battery voltage 12 V 75% Fuel Consumption (prime) L/H 23
Volts (DC) 24 V 50% Fuel Consumption (prime) L/H 16
Cooling System
Coolant capacity (engine Only) L 9.9 Maximum coolant temperature 100℃
Thermostat operation range 82 - 95℃ Minimum Pressure Cap 69kPa
Minimum Top Tank Temperature(Prime) 100℃ Maximum Top Tank Temperature(Standby) 104℃

Download