Products
CT910E3/S3

CT910E3/S3

Basic information:
Engine: KTA38-G2A
Alternator: HCI634H
Controller: DSE6020
Dimension and Weight:
Silent：6058×2438×2896(12450kg)
Open:  4200×1805×2383(7140kg)


0.00
0.00
  

Basic information:
Engine: KTA38-G2A
Alternator: HCI634H
Controller: DSE6020
Dimension and Weight:
Silent：6058×2438×2896(12450kg)
Open:  4200×1805×2383(7140kg)


Engine Specifications Alternator Specification
Model KTA38-G2A Model HCI634H
Manufacturer CUMMINS Frequency and Speed 50Hz/1500rpm
Number of cylinders 12 Manufacturer STAMFORD
Cylinder arrangement In-line       Prime capacity(kVA) 940
Cycle Four stroke Exciter type Brushless
Induction system Turbocharged Insulation Class H
Compression ratio 14.5:1 Protection IP23
Bore x Stroke 159 x 159mm Rated power factor 0.8
Displacement L 38 Stator winding Double layer concentric
Estimated total weight (dry) kg 3723 Winding pitch two thirds
Rated power KW/HP 813/1090 Winding leads 12
Lubrication oil capacity L 135 Maximum over speed 2250Rev/min
Coolant capacity L 194 THF (Wave Form IEC) ＜2%
Governer method Electronic TIF (Wave Form NEMA) ＜50
Starting System Electric Voltage regulation 1.00%
Exhaust System Lubrication system
Silence Type Industrial Total System Capacity 114litre
Exhaust gas flow (max) L/s 3225 Normal oil pressure 297-483kPa
Exhaust gas temperature (max) 536℃ Normal oil temperature ≤121℃
Engine Electrical System Fuel system
Battery charging alternator Type of injection model Direct Injection Cummins PT
Ground (negative/positive) Negative 110% Fuel Consumption (prime) L/H 215
Starter motor rated voltage (DC) 24 V 100% Fuel Consumption (prime) L/H 191
Battery voltage 12 V 75% Fuel Consumption (prime) L/H 147
Volts (DC) 24 V 50% Fuel Consumption (prime) L/H 98
Cooling System
Coolant capacity (engine Only) L 118 Maximum coolant temperature 100℃
Thermostat operation range 82 - 93℃ Minimum Pressure Cap 69kPa
Minimum Top Tank Temperature(Prime) 100℃ Maximum Top Tank Temperature(Standby) 104℃

Download