Products
CT1125E3/S3

CT1125E3/S3

Basic information:
Engine: KTA38-G9
Alternator: HCI634K
Controller: DSE6020
Dimension and Weight:
Silent：6058×2438×2896(13417kg)
Open:  4350×2090×2178(8100kg)


0.00
0.00
  

Basic information:
Engine: KTA38-G9
Alternator: HCI634K
Controller: DSE6020
Dimension and Weight:
Silent：6058×2438×2896(13417kg)
Open:  4350×2090×2178(8100kg)


Engine Specifications Alternator Specification
Model KTA38-G9 Model HCI634K
Manufacturer CUMMINS Frequency and Speed 50Hz/1500rpm
Number of cylinders 12 Manufacturer STAMFORD
Cylinder arrangement In-line       Prime capacity(kVA) 1135
Cycle Four stroke Exciter type Brushless
Induction system Turbocharged Insulation Class H
Compression ratio 13.9:1 Protection IP23
Bore x Stroke 159 x 159mm Rated power factor 0.8
Displacement L 37.8 Stator winding Double layer concentric
Estimated total weight (dry) kg 3719 Winding pitch two thirds
Rated power KW/HP 1089/1481 Winding leads 12
Lubrication oil capacity L 135 Maximum over speed 2250Rev/min
Coolant capacity L 199 THF (Wave Form IEC) ＜2%
Governer method Electronic TIF (Wave Form NEMA) ＜50
Starting system Electric Voltage regulation 1.00%
Exhaust System Lubrication system
Silence Type Industrial Total System Capacity 135litre
Exhaust gas flow (max) 7500 Normal oil pressure 310-448kPa
Exhaust gas temperature (max) 529℃ Normal oil temperature ≤121℃
Engine Electrical System Fuel system
Battery charging alternator Type of injection model Direct Injection Cummins PT
Ground (negative/positive) Negative 110% Fuel Consumption (prime) L/H 231
Starter motor rated voltage (DC) 24 V 100% Fuel Consumption (prime) L/H 212
Battery voltage 12 V 75% Fuel Consumption (prime) L/H 162
Volts (DC) 24 V 50% Fuel Consumption (prime) L/H 118
Cooling System
Coolant capacity (engine Only) L 124 Maximum coolant temperature 100℃
Thermostat operation range 82 - 93℃ Minimum Pressure Cap 69kPa
Minimum Top Tank Temperature(Prime) 100℃ Maximum Top Tank Temperature(Standby) 104℃

Download