Products
CTP9E3/S3

CTP9E3/S3

Basic information:
Engine: 403A-11G1
Alternator:PI044E
Controller: DSE6020
Dimension and Weight:
Silent：2200×1033×1304(896kg)
Open:  1500×650×1225(425kg)


0.00
0.00
  

Basic information:
Engine: 403A-11G1
Alternator:PI044E
Controller: DSE6020
Dimension and Weight:
Silent：2200×1033×1304(896kg)
Open:  1500×650×1225(425kg)


Engine Specifications Alternator Specification
Model 403A-11G1 Model PI044E
Manufacturer Perkins Frequency and Speed 50Hz/1500rpm
Number of cylinders 3 Manufacturer STAMFORD
Cylinder arrangement In-line       Prime capacity(kVA) 10
Cycle Four stroke Exciter type Brushless
Aspriation Naturally aspirated Insulation Class H
Compression ratio 23:01 Protection IP23
Bore x Stroke 77x81 mm Rated power factor 0.8
Displacement L 1.1 Stator winding Double layer concentric
Estimated total weight (dry) kg 197 Winding pitch two thirds
Rated power KW/HP 8/11 Winding leads 12
Lubrication oil capacity L 4.9 Maximum over speed 2250Rev/min
Coolant capacity L 5.2 THF (Wave Form IEC) ＜2%
Governer method Mechanical TIF (Wave Form NEMA) ＜50
Starting system Electric Voltage regulation 1.00%
Exhaust System Lubrication system
Silencer Type Industrial Total System Capacity 4.9 litre
Maximum back pressure 10.2 kpa Minimum oil pressure 120 kPa
Exhaust outlet size(horizonal/vertical) 34/40 mm Normal oil temperature 125℃
Engine Electrical System Fuel system
Battery charging alternator Type of injection model Indirect injection
Ground (negative/positive) Negative 110% Fuel Consumption (prime) L/H 3.6
Starter motor rated voltage (DC) 12V 100% Fuel Consumption (prime) L/H 3
Alternator 15amps, 12V 75% Fuel Consumption (prime) L/H 2.3
Minimum cranking speed 150 rev/min 50% Fuel Consumption (prime) L/H 1.7
Cooling System
Coolant capacity with radiator L 5.2 Max static pressure head on pump 30.4kpa
Thermostat operation range 75 - 87℃ Radiator pressure cap setting 90kPa
Maximum Top Tank Temperature(Standby) 112℃ Radiator face area 0.147㎡
Download