Products
CTP200E3/S3

CTP200E3/S3

Basic information:
Engine: 1106A-70TAG4
Alternator:UCI274H
Controller: DSE6020
Dimension and Weight:
Silent：3600×1333×2040(2959kg)
Open:  2900×900×1536(1830kg)


0.00
0.00
  
Product Description

Basic information:
Engine: 1106A-70TAG4
Alternator:UCI274H
Controller: DSE6020
Dimension and Weight:
Silent：3600×1333×2040(2959kg)
Open:  2900×900×1536(1830kg)


Engine Specifications Alternator Specification
Model 1106A-70TAG4 Model UCI274H
Manufacturer Perkins Frequency and Speed 50Hz/1500rpm
Number of cylinders 6 Manufacturer STAMFORD
Cylinder arrangement In-line       Prime capacity(kVA) 200
Cycle Four stroke Exciter type Brushless
Aspriation Turbocharged Insulation Class H
Compression ratio 16:01 Protection IP23
Bore x Stroke 105x135 mm Rated power factor 0.8
Displacement L 7.01 Stator winding Double layer concentric
Estimated total weight (dry) kg 788 Winding pitch two thirds
Rated power KW/HP 174/240 Winding leads 12
Lubrication oil capacity L 16.5 Maximum over speed 2250Rev/min
Coolant capacity L 21 THF (Wave Form IEC) ＜2%
Governer method ECM TIF (Wave Form NEMA) ＜50
Starting system Electric Voltage regulation 1.00%
Exhaust System Lubrication system
Silencer Type Industrial Maximum total system capacity 16.5 litre
Maximum back pressure 15.0Kpa Maximum oil capacity in sump 14.9 litre
Inside diameter of outlet flange 72 mm Minimum oil capacity in sump 12.4 litre
Engine Electrical System Fuel system
Battery charging alternator Type of injection model Direct injection
Ground (negative/positive) Negative Priming pump type Manual
Starter motor rated voltage (DC) 12V Maximum priming time 90 seconds
Alternator 12V, 85amps Maximum fuel flow 135 L/min
Minimum cranking speed 100 rev/min Tolerance on fuel consumption ±5%
Cooling System
Coolant capacity with radiator L 21 Radiator pressure cap setting 100kpa
Thermostat operation range 82 -93℃ Fan diamater 610mm
Maximum Top Tank Temperature(Standby) 110℃ Radiator face area 0.35㎡