Products
CT625E3/S3

CT625E3/S3

Basic information:
Engine: KTAA19-G6A
Alternator: HCI544FS
Controller: DSE6020
Dimension and Weight:
Silent：4800×1683×2200(6800kg)
Open: 3350×1280×1934(4150kg)


0.00
0.00
  
Product Description

Basic information:
Engine: KTAA19-G6A
Alternator: HCI544FS
Controller: DSE6020
Dimension and Weight:
Silent：4800×1683×2200(6800kg)
Open: 3350×1280×1934(4150kg)


Engine Specifications Alternator Specification
Model KTAA19-G6A Model HCI544FS
Manufacturer CUMMINS Frequency and Speed 50Hz/1500rpm
Number of cylinders 6 Manufacturer STAMFORD
Cylinder arrangement In-line       Prime capacity(kVA) 625
Cycle Four stroke Exciter type Brushless
Induction system Turbocharged Insulation Class H
Compression ratio 13.5:1 Protection IP23
Bore x Stroke 159 x 159 mm Rated power factor 0.8
Displacement L 18.9 Stator winding Double layer concentric
Estimated total weight (dry) kg 1905 Winding pitch two thirds
Rated power KW/HP N/A Winding leads 12
Lubrication oil capacity L 50 Maximum over speed 2250Rev/min
Coolant capacity L 66 THF (Wave Form IEC) ＜2%
Governer method Electronic TIF (Wave Form NEMA) ＜50
Starting System Electric Voltage regulation 1.00%
Exhaust System Lubrication system
Silence Type Industrial Total System Capacity 50litre
Exhaust gas flow (max) l/s 2013 Normal oil pressure 345-483kPa
Exhaust gas temperature (max) 490℃ Normal oil temperature ≤121℃
Engine Electrical System Fuel system
Battery charging alternator Type of injection model Direct Injection Cummins PT
Ground (negative/positive) Negative 110% Fuel Consumption (prime) L/H 149.5
Starter motor rated voltage (DC) 24 V 100% Fuel Consumption (prime) L/H 118.5
Battery voltage 12 V 75% Fuel Consumption (prime) L/H 88.2
Volts (DC) 24 V 50% Fuel Consumption (prime) L/H 59.9
Cooling System
Coolant capacity (engine Only) L 30 Maximum coolant temperature 100℃
Thermostat operation range 82 - 93℃ Minimum Pressure Cap 69kPa
Minimum Top Tank Temperature(Prime) 100℃ Maximum Top Tank Temperature(Standby) 104℃

CT POWER Cummins series gensets have a wide power range from 22~1500KVA, which have open type, silent type, trailer type and container type which are widely used in industrial, commercial, backup, primary power source and outdoors project work and so on.