Basic information:
Engine: KTA19-G8
Alternator: HCI544F
Controller: DSE6020
Dimension and Weight:
Silent:5000×1983×2371(9000kg)
Open: 3525×1550×2032(6600kg)
Engine Specifications | Alternator Specification | ||
Model | KTA19-G8 | Model | HCI544F |
Manufacturer | CUMMINS | Frequency and Speed | 50Hz/1500rpm |
Number of cylinders | 6/In-line | Manufacturer | STAMFORD |
Cycle | Four stroke | Prime capacity(kVA) | 670 |
Induction system | Turbocharged | Exciter type | Brushless |
Compression ratio | 15.0:1 | Insulation | Class H |
Bore x Stroke | 159 x 159 mm | Protection | IP23 |
Displacement L | 18.9 | Rated power factor | 0.8 |
Estimated total weight (dry) kg | 1905 | Stator winding | Double layer concentric |
Rated power KW/HP | N/A | Winding pitch | two thirds |
Standby power KW/HP | 575/717 | Winding leads | 12 |
Lubrication oil capacity L | 50 | Maximum over speed | 2250Rev/min |
Coolant capacity L | 66 | THF (Wave Form IEC) | <2% |
Governer method | Electronic | TIF (Wave Form NEMA) | <50 |
Starting System | Electric | Voltage regulation | 1.00% |
Exhaust System | Lubrication system | ||
Silence Type | Industrial | Total System Capacity | 50litre |
Exhaust gas flow (max) L/S | 2090 | Normal oil pressure | 276-414kPa |
Exhaust gas temperature (max) | 515℃ | Normal oil temperature | ≤121℃ |
Engine Electrical System | Fuel system | ||
Battery charging alternator | Type of injection model | Cummins MCRS | |
Ground (negative/positive) | Negative | 110% Fuel Consumption (prime) L/H | 141 |
Starter motor rated voltage (DC) | 24 V | 100% Fuel Consumption (prime) L/H | 134 |
Battery voltage | 12 V | 75% Fuel Consumption (prime) L/H | 103.2 |
Volts (DC) | 24 V | 50% Fuel Consumption (prime) L/H | 78.1 |
Cooling System | |||
Coolant capacity (engine Only) L | 66 | Maximum coolant temperature | 100℃ |
Thermostat operation range | 83 - 95℃ | Minimum Pressure Cap | 103kPa |
Minimum Top Tank Temperature(Prime) | 100℃ | Maximum Top Tank Temperature(Standby) | 104℃ |
Tel:+86 13262882192
Tel: +86 21 67691109