Products
CTP60E3/S3

CTP60E3/S3

Basic information:
Engine: 1103A-33TG2
Alternator:UCI224E
Controller: DSE6020
Dimension and Weight:
Silent：2300×1133×1376(1434kg)
Open:  1650×750×1280(908kg)


0.00
0.00
  
Product Description

Basic information:
Engine: 1103A-33TG2
Alternator:UCI224E
Controller: DSE6020
Dimension and Weight:
Silent：2300×1133×1376(1434kg)
Open:  1650×750×1280(908kg)


Engine Specifications Alternator Specification
Model 1103A-33TG2 Model UCI224E
Manufacturer Perkins Frequency and Speed 50Hz/1500rpm
Number of cylinders 3 Manufacturer STAMFORD
Cylinder arrangement In-line       Prime capacity(kVA) 60
Cycle Four stroke Exciter type Brushless
Aspriation Turbocharged Insulation Class H
Compression ratio 17.25:1 Protection IP23
Bore x Stroke 105x127 mm Rated power factor 0.8
Displacement L 3.3 Stator winding Double layer concentric
Estimated total weight (dry) kg 420 Winding pitch two thirds
Rated power KW/HP 54/72 Winding leads 12
Lubrication oil capacity L 7.9 Maximum over speed 2250Rev/min
Coolant capacity L 10.2 THF (Wave Form IEC) ＜2%
Governer method Mechanical TIF (Wave Form NEMA) ＜50
Starting system Electric Voltage regulation 1.00%
Exhaust System Lubrication system
Silencer Type Industrial Total System Capacity 8.3 litre
Maximum back pressure 10.2 kpa Oil pressure at maximum no-load speed 276-414 kPa
Exhaust outlet size 56 mm Normal oil temperature 125℃
Engine Electrical System Fuel system
Battery charging alternator Type of injection model Direct injection
Ground (negative/positive) Negative 110% Fuel Consumption (prime) L/H 15.4
Starter motor rated voltage (DC) 12V 100% Fuel Consumption (prime) L/H 13.9
Alternator 65amps, 12V 75% Fuel Consumption (prime) L/H 10.4
Minimum cranking speed 105 rev/min 50% Fuel Consumption (prime) L/H 7.2
Cooling System
Coolant capacity with radiator L 10.2 Radiator pressure cap setting 107kpa
Thermostat operation range 82 -93℃ Fan diamater and type 457mm, Pusher
Maximum Top Tank Temperature(Standby) 110℃ Radiator face area 0.276㎡