Products
CTP65E3/S3

CTP65E3/S3

Basic information:
Engine: 1104A-44TG1
Alternator:UCI224F
Controller: DSE6020
Dimension and Weight:
Silent：2300×1133×1376(1547kg)
Open:  1750×850×1300(923kg)


0.00
0.00
  
Product Description

Basic information:
Engine: 1104A-44TG1
Alternator:UCI224F
Controller: DSE6020
Dimension and Weight:
Silent：2300×1133×1376(1547kg)
Open:  1750×850×1300(923kg)


Engine Specifications Alternator Specification
Model 1104A-44TG1 Model UCI224F
Manufacturer Perkins Frequency and Speed 50Hz/1500rpm
Number of cylinders 4 Manufacturer STAMFORD
Cylinder arrangement In-line       Prime capacity(kVA) 72.5
Cycle Four stroke Exciter type Brushless
Aspriation Turbocharged Insulation Class H
Compression ratio 17.25:1 Protection IP23
Bore x Stroke 105x127 mm Rated power factor 0.8
Displacement L 4.4 Stator winding Double layer concentric
Estimated total weight (dry) kg 463 Winding pitch two thirds
Rated power KW/HP 58/78 Winding leads 12
Lubrication oil capacity L 8 Maximum over speed 2250Rev/min
Coolant capacity L 13 THF (Wave Form IEC) ＜2%
Governer method Mechanical TIF (Wave Form NEMA) ＜50
Starting system Electric Voltage regulation 1.00%
Exhaust System Lubrication system
Silencer Type Industrial Total System Capacity 8.3 litre
Maximum back pressure 10.2 kpa Oil pressure at maximum no-load speed 276-414 kPa
Exhaust outlet size 64 mm Normal oil temperature 125℃
Engine Electrical System Fuel system
Battery charging alternator Type of injection model Direct injection
Ground (negative/positive) Negative 110% Fuel Consumption (prime) L/H 16.5
Starter motor rated voltage (DC) 12V 100% Fuel Consumption (prime) L/H 14.8
Alternator 65amps, 12V 75% Fuel Consumption (prime) L/H 11.2
Minimum cranking speed 105 rev/min 50% Fuel Consumption (prime) L/H 8
Cooling System
Coolant capacity with radiator L 13 Radiator pressure cap setting 107kpa
Thermostat operation range 82 -93℃ Fan diamater and type 457mm, Pusher
Maximum Top Tank Temperature(Standby) 110℃ Radiator face area 0.276㎡