Products
CTP135E3/S3

CTP135E3/S3

Basic information:
Engine: 1106A-70TG1
Alternator:UCI274E
Controller: DSE6020
Dimension and Weight:
Silent：3600×1333×2040(2864kg)
Open:  2900×900×1536(1760kg)


0.00
0.00
  
Product Description

Basic information:
Engine: 1106A-70TG1
Alternator:UCI274E
Controller: DSE6020
Dimension and Weight:
Silent：3600×1333×2040(2864kg)
Open:  2900×900×1536(1760kg)


Engine Specifications Alternator Specification
Model 1106A-70TG1 Model UCI274E
Manufacturer Perkins Frequency and Speed 50Hz/1500rpm
Number of cylinders 6 Manufacturer STAMFORD
Cylinder arrangement In-line       Prime capacity(kVA) 140
Cycle Four stroke Exciter type Brushless
Aspriation Turbocharged Insulation Class H
Compression ratio 18.2:1 Protection IP23
Bore x Stroke 105x135 mm Rated power factor 0.8
Displacement L 7.01 Stator winding Double layer concentric
Estimated total weight (dry) kg 725 Winding pitch two thirds
Rated power KW/HP 118/158 Winding leads 12
Lubrication oil capacity L 18 Maximum over speed 2250Rev/min
Coolant capacity L 21 THF (Wave Form IEC) ＜2%
Governer method ECM TIF (Wave Form NEMA) ＜50
Starting system Electric Voltage regulation 1.00%
Exhaust System Lubrication system
Silencer Type Industrial Total System Capacity 19 litre
Maximum back pressure TBA Oil pressure at maximum no-load speed 300--340 kPa
Inside diameter of outlet flange 78 mm Normal oil temperature 105℃
Engine Electrical System Fuel system
Battery charging alternator Type of injection model Direct injection
Ground (negative/positive) Negative 110% Fuel Consumption (prime) L/H 33.8
Starter motor rated voltage (DC) 12/24V,options 100% Fuel Consumption (prime) L/H 30.2
Alternator 12/24V,options 75% Fuel Consumption (prime) L/H 22.7
Minimum cranking speed / 50% Fuel Consumption (prime) L/H 15.9
Cooling System
Coolant capacity with radiator L 37.2 Radiator pressure cap setting 68.9kpa
Thermostat operation range 82 -93℃ Fan diamater 635mm
Maximum Top Tank Temperature(Standby) 103℃ Radiator face area 0.40㎡