Products
CTP300E3/S3

CTP300E3/S3

Basic information:
Engine: 1506A-E88TAG5
Alternator：HCI444D
Controller: DSE6020
Dimension and Weight:
Silent：4100×1490×2000(4500kg)
Open:  3000×1200×2000(2760kg)


0.00
0.00
  
Product Description

Basic information:
Engine: 1506A-E88TAG5
Alternator：HCI444D
Controller: DSE6020
Dimension and Weight:
Silent：4100×1490×2000(4500kg)
Open:  3000×1200×2000(2760kg)


Engine Specifications Alternator Specification
Model 1506A-E88TAG5 Model HCI444D
Manufacturer Perkins Frequency and Speed 50Hz/1500rpm
Number of cylinders 6 Manufacturer STAMFORD
Cylinder arrangement In-line       Prime capacity(kVA) 300
Cycle Four stroke Exciter type Brushless
Aspriation Turbocharged Insulation Class H
Compression ratio 16.1:1 Protection IP23
Bore x Stroke 112x149 mm Rated power factor 0.8
Displacement L 8.8 Stator winding Double layer concentric
Estimated total weight (dry) kg 1156 Winding pitch two thirds
Rated power KW/HP 267/358 Winding leads 12
Lubrication oil capacity L 41 Maximum over speed 2250Rev/min
Coolant capacity(engine only) L 29.6 THF (Wave Form IEC) ＜2%
Governer method ECM TIF (Wave Form NEMA) ＜50
Starting system Electric Voltage regulation 1.00%
Exhaust System Lubrication system
Silencer Type Industrial Maximum total system capacity 41 litre
Maximum exhaust gas temperature 475℃ Oil pressure at maximum no-load speed 300--340 kPa
Exhaust gas flow m³/min 34.4 Normal oil temperature 105℃
Engine Electrical System Fuel system
Battery charging alternator Type of injection model Direct injection
Ground (negative/positive) Negative 110% Fuel Consumption (prime) L/H 73
Starter motor rated voltage (DC) 24V 100% Fuel Consumption (prime) L/H 65
Alternator 24V,45amps 75% Fuel Consumption (prime) L/H 48
Minimum cranking speed / 50% Fuel Consumption (prime) L/H 33
Cooling System
Coolant capacity with radiator L 26.5 Radiator pressure cap setting 110kpa
Thermostat operation range 87 -98℃ Fan diamater 813mm
Maximum Top Tank Temperature(Standby) 107℃ Radiator face area 0.49㎡