Products
CTP350E3/S3

CTP350E3/S3

Basic information:
Engine: 2206C-E13TAG2
Alternator：HCI444E
Controller: DSE6020
Dimension and Weight:
Silent：4500×1583×2200(4724kg)
Open:  3200×1206×1980(2932kg)


0.00
0.00
  
Product Description

Basic information:
Engine: 2206C-E13TAG2
Alternator：HCI444E
Controller: DSE6020
Dimension and Weight:
Silent：4500×1583×2200(4724kg)
Open:  3200×1206×1980(2932kg)


Engine Specifications Alternator Specification
Model 2206C-E13TAG2 Model HCI444E
Manufacturer Perkins Frequency and Speed 50Hz/1500rpm
Number of cylinders 6 Manufacturer STAMFORD
Cylinder arrangement In-line       Prime capacity(kVA) 350
Cycle Four stroke Exciter type Brushless
Aspriation Turbocharged Insulation Class H
Compression ratio 16.3:1 Protection IP23
Bore x Stroke 130x157 mm Rated power factor 0.8
Displacement L 12.5 Stator winding Double layer concentric
Estimated total weight (dry) kg 1478 Winding pitch two thirds
Rated power KW/HP 305/409 Winding leads 12
Lubrication oil capacity L 40 Maximum over speed 2250Rev/min
Coolant capacity(engine only) L 51.4 THF (Wave Form IEC) ＜2%
Governer method ECM TIF (Wave Form NEMA) ＜50
Starting system Electric Voltage regulation 1.00%
Exhaust System Lubrication system
Silencer Type Industrial Maximum total system capacity 40 litre
Maximum back pressure 10 kpa Oil pressure at bearing(1500 rev/min) 310 kPa
Inside diameter of outlet flange 123mm Normal oil temperature 113℃
Engine Electrical System Fuel system
Battery charging alternator Type of injection model Direct injection
Ground (negative/positive) Negative 110% Fuel Consumption (prime) L/H 82
Starter motor rated voltage (DC) 24V 100% Fuel Consumption (prime) L/H 75
Alternator 24V,70amps 75% Fuel Consumption (prime) L/H 58
Minimum cranking speed 106 rev/min 50% Fuel Consumption (prime) L/H 40
Cooling System
Coolant capacity L 51.4 Radiator pressure cap setting 70kpa
Thermostat operation range 87 -98℃ Fan diamater 927mm
Maximum Top Tank Temperature(Standby) 104℃ Radiator face area 1.238㎡