Products
CT50E3/S3

CT50E3/S3

Basic information:
Engine: 4BTA3.9-G2
Alternator: UCI224D
Controller: DSE6020
Dimension and Weight:
Silent：2350×1133×1516(1530kg)
Open: 1900×783×1257(926kg)


0.00
0.00
  
Product Description

Basic information:
Engine: 4BTA3.9-G2
Alternator: UCI224D
Controller: DSE6020
Dimension and Weight:
Silent：2350×1133×1516(1530kg)
Open: 1900×783×1257(926kg)


Engine Specifications Alternator Specification
Model 4BTA3.9-G2 Model UCI224D
Manufacturer CUMMINS Frequency and Speed 50Hz/1500rpm
Number of cylinders 4 Manufacturer STAMFORD
Cylinder arrangement In-line       Prime capacity(kVA) 50
Cycle Four stroke Exciter type Brushless
Induction system Turbocharged Insulation Class H
Compression ratio 16.5:1 Protection IP23
Bore x Stroke 102x120 mm Rated power factor 0.8
Displacement L 3.9 Stator winding Double layer concentric
Estimated total weight (dry) kg 350 Winding pitch two thirds
Rated power KW/HP 50/67 Winding leads 12
Lubrication oil capacity L 10.9 Maximum over speed 2250Rev/min
Coolant capacity L 20.8 THF (Wave Form IEC) ＜2%
Governer method Electronic TIF (Wave Form NEMA) ＜50
Starting system Electric Voltage regulation 1.00%
Exhaust System Lubrication system
Silence Type Industrial Total System Capacity 10.9 litre
Exhaust gas flow (max) 155 litre Normal oil pressure 207-345kPa
Exhaust gas temperature (max) 485℃ Normal oil temperature ≤121℃
Engine Electrical System Fuel system
Battery charging alternator Type of injection model BYC A Pump
Ground (negative/positive) Negative 110% Fuel Consumption (prime) L/H 16
Starter motor rated voltage (DC) 24V 100% Fuel Consumption (prime) L/H 14.5
Battery voltage 12V 75% Fuel Consumption (prime) L/H 10
Volts (DC) 24V 50% Fuel Consumption (prime) L/H 6.9
Cooling System
Coolant capacity (engine Only) L 7.9 Maximum coolant temperature 100℃
Thermostat operation range 82 - 95℃ Minimum Pressure Cap 69kPa
Minimum Top Tank Temperature(Prime) 100℃ Maximum Top Tank Temperature(Standby) 104℃
CT POWER Cummins series gensets have a wide power range from 22~1500KVA, which have open type, silent type, trailer type and container type which are widely used in industrial, commercial, backup, primary power source and outdoors project work and so on.