Basic information:
Engine: 6BTA5.9-G2
Alternator: UCI274D
Controller: DSE6020
Dimension and Weight:
Silent:3200×1133×1766(2130kg)
Open: 2200×830×1325(1297kg)
Engine Specifications | Alternator Specification | ||
Model | 6BTA5.9-G2 | Model | UCI274D |
Manufacturer | CUMMINS | Frequency and Speed | 50Hz/1500rpm |
Number of cylinders | 6 | Manufacturer | STAMFORD |
Cylinder arrangement | In-line | Prime capacity(kVA) | 120 |
Cycle | Four stroke | Exciter type | Brushless |
Induction system | Turbocharged | Insulation | Class H |
Compression ratio | 17.5:1 | Protection | IP23 |
Bore x Stroke | 102 x 120 mm | Rated power factor | 0.8 |
Displacement L | 5.9 | Stator winding | Double layer concentric |
Estimated total weight (dry) kg | 453 | Winding pitch | two thirds |
Rated power KW/HP | 106/142 | Winding leads | 12 |
Lubrication oil capacity L | 14.2 | Maximum over speed | 2250Rev/min |
Coolant capacity L | 28 | THF (Wave Form IEC) | <2% |
Governer method | Electronic | TIF (Wave Form NEMA) | <50 |
Starting system | Electric | Voltage regulation | 1.00% |
Exhaust System | Lubrication system | ||
Silence Type | Industrial | Total System Capacity | 16.3litre |
Exhaust gas flow (max) | 300 litre | Normal oil pressure | 207-345kPa |
Exhaust gas temperature (max) | 505℃ | Normal oil temperature | ≤121℃ |
Engine Electrical System | Fuel system | ||
Battery charging alternator | Type of injection model | PB pump | |
Ground (negative/positive) | Negative | 110% Fuel Consumption (prime) L/H | 30 |
Starter motor rated voltage (DC) | 24 V | 100% Fuel Consumption (prime) L/H | 27 |
Battery voltage | 12 V | 75% Fuel Consumption (prime) L/H | 20 |
Volts (DC) | 24 V | 50% Fuel Consumption (prime) L/H | 14 |
Cooling System | |||
Coolant capacity (engine Only) L | 9.9 | Maximum coolant temperature | 100℃ |
Thermostat operation range | 82 - 95℃ | Minimum Pressure Cap | 69kPa |
Minimum Top Tank Temperature(Prime) | 100℃ | Maximum Top Tank Temperature(Standby) | 104℃ |
Tel:+86 13262882192
Tel: +86 21 67691109